Universal Cable/Pipe Bracket - Side Flush Mount

This one piece stainless steel clamp replaces is designed to hold brake cables, throttle cables, oil lines, or any other item that needs locking in position.

It will work with diameters up to 8.5mm or around 11/32"  

it can be drilled out to 11mm or 7/16" if you wish.

Award Cycle Clamps

• Can clamp the thinnest throttle cables on the market.
  
• Are one piece so no plate to shake loose.
• Have one 4.4mm mounting hole which can be expanded to 1/4" if you need to yourself

Notes on Fitment

• Some fettling of the parts may be required for fitment, this is expected as engines, frames, and combinations of the two vary massively over the years, and many have been modified far from stock.
• The stock Screw is M4x0.7x10mm, shorter screws and spring washers can be used for thicker throttle cables, there is also enough meat to drill out the cable hole more if required.
• You are responsible for your work, and your bike.  If you are not qualified to work on a motorcycle and make it safe for the road, please seek out a professional to do the work as I am not responsible for poor fitment of my parts.