Linkert/Schebler Long Velocity Stack

This Aluminium intake is compatible with Linkert "M" series carburettors.

This part consists of a single flange that mounts to the carburettor with the 4 factory screws (not supplied). it will accept both the standard flat drive screw, the oversized flat drive screw and will also even accept modern allen-head screws. 

Then there is the intake horn that is a snug fit over the flange.  The horn has one M4x0.7mm set-screw/grubs-screw hidden under the front lip that allows it to be located tightly onto the flange.

The whole part weighs 200g...its chonky!

Some gentle felting of the part may be required if you consider it too snug but this is only because I sell most of my parts in raw finish too keep your costs down, and also allow you to polish, anodize, antique, or paint as required.

I recommend a dab of Loctite 243 or Loctite Blue thread locker on the set screw once you have chosen your position just to prevent vibration affecting it.