Accelerator Pump Cover for Dellorto PHF and PHM Carburetors

This pump cover plate is for those of you removing the accelerator pumps from Dellorto PHF and PHM series Carburetors. 

You will also need 3 x M4 x 0.7mm x10mm screws, the original 8428 screws will be too long.

Please use Gasket (Dellorto part 9278 when fitting) to ensure no air leak.  If you choose to use gasket sealant some lapping of the gasket surface may also be required on the carb and cover to ensure the best fit.